LIF200 User Manual
30
Set LIF-200 to factory default using RS232 communications
1)
Connect LIF-200 to computer via RS-232 cable and set RS232/485 switch to the RS232 position.
You must use a crossover cable
.
The second pin of the LIF-200 connects to the third pin of
the computer and the third pin of the LIF-200 connects to the second pin of the computer
.
2)
Run HyperTerminal™
a)
Enter a name and select an icon for this communication, then click „OK‟ to continue.
b)
Select the appropriate COM port for the LIF-200 connection to the computer then click „OK‟ to
continue.
