background image

Specifications     58 

Expanded operating temperature 

Specifications 

≤ 1% of annual operating hours

 

5°C to 45°C at 5% to 90% RH with 29°C dew point. 

  NOTE: Outside the standard operating temperature (10°C 

to 40°C), the system can operate down to 

5°C or up to 45°C 

for a maximum of 1% of its annual operating hours. 
For temperatures between 40°C and 45°C, derate maximum 
allowable temperature by 1°C per 125 m above 950 m (1°F 
per 228 ft). 

NOTE: 

When operating in the expanded temperature range, system performance may be 

impacted. 

 

NOTE: 

When operating in the expanded temperature range, ambient temperature 

warnings may be reported on the bezel's LCD panel and in the System Event Log. 

 

Expanded operating temperature restrictions 

 

Do not perform a cold startup below 5°C. 

 

The operating temperature specified is for a maximum altitude of 3050 m (10,000 
ft). 

 

Redundant power supply configuration is required. 

 

AEP DIMM is not supported. 

 

GPGPU card is not supported. 

 

Rear drive configuration is not supported. 

 

12 x 3.5 inch SM configuration with CPU 140 W/130 W/115 W/105 W_4C is not 
supported. 

 

LRDIMM is not supported. 

 

Non-Razberi Core qualified peripheral cards and/or peripheral cards greater than 
25 W are not supported. 

 

Tape backup unit (TBU) is not supported. 

 

Содержание V8


















































































































Отзывы: