manualshive.com logo in svg

Raytheon SNV-12, Инструкция по установке и эксплуатации

Raytheon SNV-12 - высококачественный прибор для навигации и связи. Для правильной установки и использования требуется ознакомиться с "Руководством по установке и эксплуатации". Вы можете бесплатно скачать его с нашего сайта. manualshive.com - ваш надежный источник инструкций для продуктов Raytheon.

Поделиться
Скачать
background image

 

                 

SNV-12 Operations Manual 

 

 
 

5-22

 

5.19.5.3

 

TX Site Selection Examples 

 

Start with the SNV-12 set per the following: 

Repeat Mode off, STARS and RX Groups off, Default TX Site is Multicast. 

When the SNV-12 is first powered up, TX Select LEDs of all SVM-2s will be lit (and 
the  Select  LEDs  of  all  SVM-1s  will  flash…  the  remainder  of  this  explanation  will 
assume  that  SVM-2s  are  installed,  but  the  SVM-1  would  function  identically  with 
flashing  Select  LEDs  instead  of  individual  TX  Select  LEDs).    If  Console  PTT  is 
activated, the TX outputs of all SVMs will be activated and console audio will be sent 
via all SVM TX Audio  Outputs.  When any site is  voted, all TX Select LEDs  remain 
illuminated,  as  automatic  TX  Steering  (STARS)  is  not  enabled  and  repeated  audio  is 
sent  to  all  SVM  TX  audio  outputs.    If  manual  TX  Steering  is  employed,  only  the 
manually  TX  steered  site  will  show  the  TX  Select  indication.    If  the  “Momentary” 
versions  of  Manual  TX  Steering  are  used,  the  sites  selected  for  TX  will  revert  to 
multicast  as  soon  as  the  Holdover  Timer  expires.    If  either  of  the  non-momentary 
versions is used, the TX site selection will remain with the manually selected site until 
the manual selection is de-asserted. 

 

Now set SVMs #6 and #8 as RX-Only Sites. 

Operation is identical, except that SVMs #6 and #8 will not transmit and their TX Select 
LEDs will not be illuminated.  If either of these sites is manually TX selected, the SNV-
12 will simply ignore the request, as they are RX-Only sites. 

 

Now turn on STARS, with the Holdover Timer set for 10 seconds 

Initial operation will not change, as STARS has no effect until a site is voted.  Assume 
that site #5 is voted; STARS now steers all console transmissions to site #5 only, until 
there is no communication from either the console or from site #5 for a continuous 10 
seconds.  Therefore, only site #5 will have a TX Select LED indication.  When the 10 
seconds  elapse (the Holdover Timer has expired), the system will revert to sending all 
console transmissions to the Default Site.  In this example, the Default Site Selection is 
Multicast; so all TX Select LEDs (except for the RX-Only sites #6 & #8) will be lit. 

Now assume that one of the RX-Only sites is voted.  Since this site cannot be keyed, the 
voter  reverts  to  keying  the  Default  TX  Site,  which  in  this  example  is  still  set  to 
Multicast. 

 

Now set up an RX group, which includes the RX-Only sites #6 and #8. 

Assume  that  there  are  several  satellite  receivers,  but  only  one  transmitter  (at  site  #7), 
covering the area where sites 6, 7 and 8 10 are located.  Set up sites 6 through 8 as an 
RX  group.    Now  if  any  of  the  sites  in  the  group  is  voted,  STARS  chooses  the  entire 
group  for  TX  steering.   Since  site  #7 is the  only  TX-eligible  site in the  group,  only  it 
will be keyed by a console transmission, and only it will have its TX Select LED lit. 

If the SVMs for sites #6 and #8 had not been set up as RX-only sites, they would also 
be TX eligible, and, if any site in the group is voted, the TX Select LEDs for all three 
sites  in  the  group  would  be  lit  until  the  Holdover  Timer  expires.    Note  that  if  site  #7 
were now designated as the Primary Site for the RX Group that includes sites 6 through 
8, the  system  operation  would  be  the  same  as  for the  group  with  no Primary  Site  and 
sites #6 and #8 configured as RX-Only sites. 

Содержание SNV-12















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SNV-12

Samsung GALAXY MEGA Manual preview
GALAXY MEGA
Бренд: Samsung Страницы: 2
Samsung Galaxy MEGA SGH-I527 Manual Del Usuario preview
Galaxy MEGA SGH-I527
Бренд: Samsung Страницы: 237
Samsung Galaxy j7 Crown Manual preview
Galaxy j7 Crown
Бренд: Samsung Страницы: 33
Samsung Galaxy J3 Manual preview
Galaxy J3
Бренд: Samsung Страницы: 39
Samsung Fin Startup Manual preview
Fin
Бренд: Samsung Страницы: 28
Samsung Exclaim SPH-M550 Manual Del Usuario preview
Exclaim SPH-M550
Бренд: Samsung Страницы: 226
Samsung E810 Quick Start Manual preview
E810
Бренд: Samsung Страницы: 12
Samsung E630 - SGH Cell Phone Manual Del Usuario preview
E630 - SGH Cell Phone
Бренд: Samsung Страницы: 103
Samsung DoubleTime SGH-I857 Manual Del Usuario preview
DoubleTime SGH-I857
Бренд: Samsung Страницы: 225
Samsung Delve SCH-R800 Series Manual Del Usuario preview
Delve SCH-R800 Series
Бренд: Samsung Страницы: 180
Samsung Galaxy light Setup Manual preview
Galaxy light
Бренд: Samsung Страницы: 10
Samsung Galaxy Note 3 Disassembly Manual preview
Galaxy Note 3
Бренд: Samsung Страницы: 7
Samsung Galaxy Music GT-S6010 Quick Start Manual preview
Galaxy Music GT-S6010
Бренд: Samsung Страницы: 39
Samsung Byline SCH-R310 Serie Manual Del Usuario preview
Byline SCH-R310 Serie
Бренд: Samsung Страницы: 119
Samsung E800 Owner'S Manual preview
E800
Бренд: Samsung Страницы: 100
Samsung galaxy note 5 Get To Know preview
galaxy note 5
Бренд: Samsung Страницы: 2
Samsung galaxy note 5 Manual preview
galaxy note 5
Бренд: Samsung Страницы: 148
Samsung A717 - SGH Cell Phone 26 MB Manual Del Usuario preview
A717 - SGH Cell Phone 26 MB
Бренд: Samsung Страницы: 189

Бренды по названию

Популярные бренды

Загрузить еще бренды