Raytheon SNV-12 Скачать руководство пользователя страница 156 | Manualshive

Страница: 156 / 206

background image

SNV-12 Operations Manual

5-14

5.17.2

Holdover Timer With Momentary Manual TX Steering

The  Holdover  Timer  is  also  active  when  TX  steering  selections  are  made  via  the  MOM  TX
SEL input on the SVM‟s rear panel terminal block or by the RS-232 MOM_TXSEL command.
Once  a  momentary  transmit  command  is  made,  the  Holdover  Timer  starts.    Console
transmissions  and  repeat  transmissions  will  be  steered  to  the  chosen  site  until  the  holdover
timer expires.  The timer is refreshed every time the console PTT is activated and begins to run
again as  soon  as  the  PTT  is  deactivated.  Voted  audio  from  the  field  does  not  reset  the  timer.
Transmit  selection  remains  with  the  chosen  site  until  either  the  Holdover  Timer  expires  or
another  site  is  manually  selected  (both  manual  TX  steering  modes  have  precedence  over
STARS).

5.17.3

Holdover Timer With Latched Manual TX Steering

The  Holdover  Timer  does  not  come  into  play  when  non-momentary  Manual  TX  Steering  is
used.  For these “latched” versions, the console transmissions and repeated transmissions will
be  steered  to  the  chosen  site  until  the  TX  steering  request  is  removed.    When  the  rear  panel
“TX Sel In” input is pulled low, the site will be TX steered until the input is allowed to return
high.  If the RS-232 TXSEL command is issued, the specified site will remain TX steered until
a subsequent RS-232 command removes this selection.

5.17.4

Holdover Timer Examples

STARS, single site:

Start with no activity. The TX SEL site is the Default TX Site.

A site gets voted. TX SEL switches to the voted site.

When the vote ends, the TX SEL stays with this voted site for the duration of the
holdover timer, then returns to the Default TX Site.

STARS, multiple sites:

Start with no activity. TX SEL is the Default TX Site.

A site gets voted. TX SEL switches to the voted site.

A new site gets voted before all sites resquelch. Once the STARS weighting balance
switches to the newly voted site, it becomes the TX SEL site. If it doesn‟t stay voted
long enough (that is, more time in the previous 5 seconds than any other site) then it
won‟t become the TX SEL site.

When the vote sequence ends, the TX SEL stays with the site that last had this
designation during the vote for the duration of the holdover timer, then returns to the
Default TX Site.

Mom TX, single site:

Start with no activity. The TX SEL site is the Default TX Site.

1.

A site is selected by Mom TX as the TX SEL site. The holdover timer starts running as
soon as it‟s invoked. When it runs out, the TX SEL site designation returns to the
Default TX site.

2.

If the Mom TX is invoked again on the same site before the holdover timer expires, the
timer is reset and starts anew.

«
...
154
155
156
157
158
...
»

Содержание SNV-12















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SNV-12

Бренд: Yealink Страницы: 8

Бренд: T-Mobile Страницы: 2

Бренд: Samsung Страницы: 78

Бренд: Samsung Страницы: 28

Бренд: Samsung Страницы: 7

Бренд: Yealink Страницы: 2

Бренд: Verykool Страницы: 23

One Touch 997D Ultra

Бренд: Alcatel Страницы: 21

Бренд: HTC Страницы: 24

Бренд: Kyocera Страницы: 32

Бренд: H-TEK Страницы: 142

Бренд: Uniden Страницы: 141

Бренд: VIA Technologies Страницы: 15

Бренд: NTT docomo Страницы: 211

Бренд: Nebi.Mobi Страницы: 21

Бренд: Docomo Страницы: 95

Бренд: PCD Страницы: 73

Бренд: Nortel Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды