manualshive.com logo in svg

Raytheon RayChart 620, Руководство по эксплуатации

Поделиться
Скачать
Raytheon RayChart 620 Скачать руководство пользователя страница 63

50

RayChart 620

The Current Route screen lists the waypoints for the current route,
showing the waypoint symbol, number (assigned by the RayChart) and
name for each waypoint. The box below the list gives the following
details for the highlighted waypoint:

• Position, in either latitude and longitude or TDs, depending on your

setup

• Range and bearing from your vessel’s position

• Estimated time of arrival (ETA) at the waypoint

• Total time elapsed since the start of the route

• Total distance covered since the start of the route

The ETA predictions are based on either the current or planned speed
over the ground (SOG), as displayed above the list of waypoints,
depending on your selection.

Current Route Operations

With the current route summary displayed, you can use the soft keys to
perform the following tasks:

NEXT LEG

Jumps to the next leg of the route. This has the
same effect as the NEXT LEG option from the
ROUTE default soft key menu.

PLANNED SOG

Switches from Current SOG to Planned SOG to
calculate the ETA for each waypoint.

The Planned SOG value is displayed above the
waypoint list instead of the Current SOG, and the
ADJUST SOG soft key becomes available so that
you can change the planned SOG value.

or CURRENT SOG Switches from Planned SOG to Current SOG to

calculate the ETA for each waypoint.

ADJUST SOG

This soft key is only available  if you have already
selected the PLANNED SOG option, and
displays the Planned SOG window. Use the
trackpad to adjust the value, and press ENTER to
accept the new value.

Содержание RayChart 620


























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды