10
4c. Timer Function
The timer function allows the VARIO2 illuminator to be triggered ON via a
telemetry input and remain on for a pre-defined period of time. There are
four pre-defined times and a timer disable function. To select timer function,
first press and release Telemetry TEL button, then secondly press duration
of timer required as shown below. Factory Default = Timer Disabled
If you wish to cancel timer period and have the unit operate under standard
telemetry conditions, press Timer Disabled.
Note: The timer only functions when the Telemetry Input Wires are used
with a remote switch; alarm system; PIR detector, etc and a closed circuit
input signal is received. The light will come on and stay on. When the input
signal stops the light will remain on for the time set by the timer.
If the telemetry wires are permanently joined the timer does not function.
VARIO2 POE (Non Premium): Timer function not available.
VARIO2 Hybrid: Timer only available in White Light mode
30 minutes
10 minutes
3 minutes
1 minute
Timer disabled
