Raytec VARIO2 IP 16 Series, Полное руководство по установке и настройке

Страница: 12 / 64

12
components can communicate with each other.
With the VARIO2 IP powered and attached to the same network, press
Discover
and
the Raytec Discovery Tool will display a list of illuminators available on the network.
See instructions above on how to change IP address or enable DHCP in order to
allow communication with the illuminator.
Once the IP address of the illuminators have been changed, you can double click on
the illuminator from the Raytec Discovery Tool to navigate directly to the illuminators
web interface.
The Raytec Discovery Tool allows you to:-
•
Discover all illuminators on the network – illuminators do not need a valid IP
address to be discovered
•
Alter IP address of illuminator – the illuminator must have a valid IP address to
allow communication
•
Enable DHCP
•
Navigate directly to each illuminator – once a valid IP address has been
assigned
•
See the illuminators status
•
See whether the illuminator is ON / OFF
•
View the MAC address of each illuminator
• Change Network Settings
•
Change the Name and Group Name
• See additional illuminator details including name, firmware version, model and
the time the illuminator has been powered.