Raypak 910500, Руководство пользователя и инструкции по установке

Страница: 85 / 108

85
Touchscreen Menu Overview
3D System View
These three screens are used to view system
and master/slave information
Master Info
System View
Refer to 'VIEW Menu' on page 86
Operation
Settings
Used to adjust operating parameters
(H models only)
System Settings
Used to adjust system parameters
(all models)
Mix Settings
Not used (screen not available)
Indirect Settings
Only for H models with indirect DHW
(1)
Outdoor Settings
Only used for optional outdoor air
compensation
(2)
Modbus Settings
Used for configuring optional EMS/BMS
Refer to 'ADJUST Menu' on page 88
Boiler 1
Each boiler screen displays information
relative to the boiler (heater) selected. Also
used to change Outlet Max, Mass, and Post
Purge (pump run-on) parameter settings for
each heater
Boiler 2
Boiler 3
Boiler 4
Boiler Error
History
Displays error history of all connected heaters
Refer to 'BOILER Menu' on page 91
System Tools
The tools menu contains miscellaneous items
such as screen time-out timer, Celsius to
Fahrenheit, technician test execution, clock
setup, touchscreen reboot and reset to
default function
Touchscreen Setup
Clock Setup
Screen Reboot
Refer to 'TOOLS Menu' on page 94
(1)
Screen only available if ADJUST > Operation Settings > Operation Mode parameter is set to 2 or 3.
(2) Screen only available if ADJUST > Operation Settings > Target Mode parameter = RSET (H models
only).