Raypak 910500, Руководство пользователя и инструкции по установке

Страница: 41 / 108

41
Lock Band Clamp (1 per flue piece)
Dia 150 - AQ94200114
Dia 200 - AQ94200135
Lock Band Screw
Dia 150 - AQ94200115
Dia 200 - AQ94200136
Mounting Band (1 per 1.5m of run)
Dia 150 - AQ94200116
Dia 200 - AQ94200137
Horizontal Terminal (can be cut to length)
Dia 150 - AQ94200121
Dia 200 - AQ94200144
Outdoor Flue Stand (can be cut to length)
Dia 150
– AQ94200223
Dia 200
– AQ94200224
Lubricating Grease 250g
(approx. 1 required per 15 sections of flue)
AQ0080503
Table 16: MVB Flue Components
FLUE CLEARANCES
The following distances extracted from the Australian Gas Installations Standard AS/NZS 5601.1 relate
to outdoor installations and indoor installations with horizontally terminating flues and must be observed:
• At least 500 mm between the top of the flue terminal and the eaves.
• At least 1,500 mm horizontally between the flue terminal and the edge of any opening into the
building, measured horizontally.
• At least 500 mm between the flue terminal and a return wall or external corner, measured
horizontally along the wall.
• At least 1,500 mm below any openable window.
At least 500 mm between the flue terminal and a fence, wall or other obstruction facing the terminal.
It is recommended that a distance not less than 1.5m be maintained directly in front of a
horizontal discharge terminal to avoid condensate forming on the opposing structure. Flue gasses are
corrosive. It is recommended that any obstructing surface be clad with a rust-resistant sheet to prevent
any damage that may otherwise result from condensation.