5973129-17
14 Pin Connector
Auxiliary Board (when supplied)
1. The contacts on the auxiliary board are rated for 3 amps. If the device you are activating draws
more than the rated 3 amps, you will need to drive a relay that has the correct rating. Then use
the dry contacts of that relay to activate the device. If more than 3 amps of power is being consumed
through the auxiliary board, then damage to the board may occur.
2. There is a 14 pin connector on the main board which allows you to connect an auxiliary board to
the main board. Take care to never short these pins together or damage to main board will occur.
Always disconnect power before attempting any type of work on any garage door opener.
