1
6300M/MF EXIT INSTALLATION INSTRUCTION
MORTISE DEVICE
Phone: 833-2-PDQTEC | www.pdqlocks.com
2. DOOR PREPARATION
Prepare the door for the mortise lock
using the 6300M/MF template in box.
Refer to trim template if installing trim.
Install the mortise case and secure using
two (2) #12-24 combo screws supplied in
the hardware kit.
639415 Rev0 – 4/22/21
1. MORTISE HANDING
To re-hand mortise case, remove latch
bolt screw as shown.
Orient the latch bolt head to match
handing.
Reinsert and tighten the latch bolt screw.
3. PREPARE DEVICE
Install locating stud on lower threaded
insert as determined by handing.
Rotate lower mortise driver as shown
until it stops. Make sure when installing
that mortise driver remains in this
position.
LOCATING
STUD
MORTISE
DRIVER
THREADED
INSERT
LEFT HAND REVERSE
(LHR)
RIGHT HAND REVERSE
(RHR)
OUTSIDE
INSIDE
OUTSIDE
INSIDE
LATCH BOLT
HEAD SCREW
LATCH BOLT
HEAD
LATCH BOLT
HEAD
LATCH BOLT
HEAD SCREW
