Raymarine SmartPilot SPX-10, Руководство по установке

Страница: 12 / 50

2.1 Installation checklist
Installation includes the following activities:
Installation Task
1 Plan your system
2 Obtain all required equipment and tools
3 Site all equipment
4 Route all cables.
5 Drill cable and mounting holes.
6 Make all connections into equipment.
7 Secure all equipment in place.
8 Power on test the system.
Schematic diagram
A schematic diagram is an essential part of planning any installation.
It is also useful for any future additions or maintenance of the
system. The diagram should include:
• Location of all components.
• Connectors, cable types, routes and lengths.
2.2 Inboard autopilot system
A typical inboard autopilot will consist of the items shown:
SMART PILOT
3
4 5
1
2
D10432-2
1. Autopilot control head — This provides the display and
controls required to use the autopilot. Multiple controllers can be
added if required, for example a controller at each helm position.
12 SPX SmartPilot installation instructions