Raymarine SmartPilot SPX-10, Руководство по установке

Страница: 24 / 50

3.4 Power and drive cables
When determining the cable required for the power and drive
connections it is necessary to consider the combined cable length of
both connections.
A
B
D10454-2
1 2 3
1. Course computer
2. Power supply / distribution panel
3. Drive unit
Power and drive cable selection
Drive
Supply
voltage Max. length
(A+B)
Cable size
Type 0.5 hydraulic
pump
0–7 m (0–23 ft) 2.5 mm 2 (14 AWG) • Type 1 drive
• CR pump
(SPX-SOL
only)
12 V
7–10 m
(23–32.8 ft) 4 mm 2 (12 AWG)
Drive
Supply
voltage Max. length
(A+B)
Cable size
0–5 m
(0–16.4 ft) 6 mm 2 (10 AWG) 12 V
5–7 m
(16.4–23 ft) 10 mm 2 (8 AWG)
0–3 m (0–9.8 ft) 4 mm 2 (12 AWG)
3–5 m
(9.8–16.4 ft) 6 mm 2 (10 AWG)
Type 2 drive
24 V
5–10 m
(16.4–32.8 ft)
10 mm 2 (8 AWG)
12 V 0–5 m
(0–16.4 ft) 10 mm 2 (8 AWG)
0–5 m
(0–16.4 ft) 6 mm 2 (10 AWG)
Type 3 drive
24 V
5–7 m
(16.4–23 ft) 10 mm 2 (8 AWG)
Important: Use of an incorrect power cable size will reduce the
power supplied to the drive unit and could cause your autopilot to
malfunction. If in doubt, use a heavier gauge cable.
Power and drive connection
Power connection
Power to the course computer must be from an appropriately fused
and rated supply.
24 SPX SmartPilot installation instructions