Raymarine SmartPilot SPX-10, Руководство по установке

Страница: 27 / 50

3.5 Fuses and circuit protection
Power supply circuit protection
The power supply must be connected using an appropriately rated
and fused switch or thermal breaker. The drive type determines the
rating of the breaker or fuse required.
Drive unit Supply voltage Fuse
Thermal
over-current
circuit breaker
0.5 l hydraulic
pump 12 V 15 A 10 A
Type 1 (Rotary,
Linear or
Hydraulic)
12 or 24 V 25 A 20 A
12 V 40 A 30 A Type 2 (Rotary,
Linear or
Hydraulic)
24 V 30 A 30 A
Type 3 (
Hydraulic linear)
12 V or 24 V 40 A 30 A
I/O 12 V 15 A 10 A
CR pump
(Solenoid) 12 or 24 V 10 A 10 A
Internal fuses
The course computer uses standard automotive blade fuses. Spare
fuses are located on underside of the removable cover.
Rayma rine
GROUND
P OWER
P OWER
P
O
W
E
R
12V
OFF ON
24V
FLUXGATE RUDDER
CLUTCH
FAULT
S LEEP
FAULT
MOTOR
A B
D11937-1
2
1 3
1. SeaTalk ng fuse. (Fuse power supply from course computer to
SeaTalk ng backbone.
2. SeaTalk fuse. (Fuse power supply from course computer to
connected SeaTalk devices).
3. Power fuse. (Fuse total power consumed by system, including
the drive unit.)
SeaTalk ng SeaTalk Power
SPX-10 2 A 2 A 15 A
SPX-30 3 A 3 A 40 A
SOX-SOL
3 A 3 A 15 A
Cables and connections 27