RAYCOM C
ELLULAR
(AMPS)
21
RAYCOM OPERATION
Three-Way Conference Calls -
For three-way conference calls, the Out-of-
Band Signaling option must be enabled. Pressing the HOOKFLASH function
transmits the SEND command. Please see the Data After SEND option below.
Voice Mail –
Out-of-Band Signaling may need to be disabled to interact with
remote voice mail systems to prevent double-pulsing. See the Data After SEND
option below.
Authentication (A-Key) –
Depending upon your cellular provider, you may be
required to enter an Authentication Code (A-Key) before you make or receive
any calls. A-Key is a cellular system solution to prevent cloning, counterfeiting
and cellular fraud. To program the A-Key function, see the Technician
Programming Section – page 27.
Data After SEND (In-Call Signaling) Option
Depending upon your cellular provider, the Data After SEND option may need to
be Enabled or Disabled to use special cellular features such in entry as call
waiting, three-way conference calls, voice mail, etc. Please consult your service
provider for the required Data After Send/In-Call DTMF Signaling configuration.
The Data After SEND option is disabled (Out-of-Band signaling) at the factory.
To change the Data After SEND setting, follow the steps below.
How To Set the In-Call DTMF Signaling Option - Pick up the handset and listen
for dial tone. Then, enter the User-Programming mode by pressing:
# * 0 * 1 2 3 4 5 6 7 8 #
The dial tone should change to a steady “Programming” tone and the LED
indicator on the front of your Raycom should blink alternately RED and GREEN
to indicate that you’re now in the Programming mode.
Next, press:
# * 10 *
<in-call DTMF option> #
The
< >
brackets represents the in-call DTMF signaling option. You must enter
a value between
0
and
3
:
enter
0
for In-Band Signaling;
enter
1
for Out-of-Band Signaling;
enter
2
for both In-Band and Out-of-Band signaling;
enter
3
for neither.
If you enter the option incorrectly, you’ll hear three short beeps followed by
the programming tone. That’s your cue to re-try the steps above. If correct,
☞
☞
☞
☞
☞
☞
