Raymarine P70, Инструкция по установке и эксплуатации

Страница: 55 / 104

9.3 Mode menu
Pilot modes are accessed from the Mode menu. The available
modes are determined by the autopilot system and the selected
vessel hull type.
The modes available are shown below.
Evolution SPX SmartPilot
Pattern Power vessel Motor and Fishing
vessels
Track all all
Wind vane Sailing vessel only Sailing vessel only
*Power Steer
p70R and joystick only p70R and joystick only
Note:
• * Power steer mode is only available on vessels fitted with a
rudder reference transducer.
• ** Wind vane mode is only available if there is a connect
source of wind data.
The mode menu also provides a shortcut key option that enables
a mode to be assigned to the
Left Soft button (The default
option is Track).
9.4 Patterns
A number of pre-set fishing patterns are available which can
be used with their default settings or adjusted to your own
preference.
The following patterns are available:
Pattern Adjustment Icon
Direction Circle
Radius
Direction
Angle
Zig Zag
Length
Direction Cloverleaf
Radius
Direction
Radius
Spiral
Increment
Direction
Radius
Circle against
Distance
Direction Figure 8
Radius
Direction
Width
Height
Width increment
Pattern search
Height increment
Direction 180 turn
Radius
Direction
Width
Box search
Height
Using a fishing pattern
In order to use a fishing pattern:
1. Press the RIGHT SOFT button to open the menu.
2. Using the UP and DOWN buttons highlight Mode and press
SELECT .
3. Using the UP and DOWN buttons highlight Pattern and
press SELECT .
4. Using the UP and DOWN buttons highlight the fishing pattern
you wish you use and press SELECT .
5. The pattern settings screen shall be displayed, showing the
parameters currently set for the selected pattern. If you want
to change any of the parameters:
i.
Select the parameter you want to change, then press
EDIT .
ii. Use the UP and DOWN buttons to set the value you want,
then press SAVE to save the setting and return to the
Pattern settings screen.
iii. Repeat steps i and ii as necessary, for the other
parameters.
6. When all parameters are set as required, and with the pattern
settings screen displayed, press AUTO . The autopilot then
steers the boat over the fishing pattern you selected.
To return to manual steering at any time, press STANDBY .
Pilot modes 55