Raymarine P70, Инструкция по установке и эксплуатации

Страница: 21 / 104

3.12 Before using your pilot controller
Before using the pilot controller under way it is important that
it is properly commissioned and set up as described in the
installation instruction.
First time set up
The first ever time the pilot controller is powered on, you will be
shown on-screen instructions for the initial set up. If your pilot
controller has been installed by a professional installer, first time
set up and commissioning may already have been carried out, if
unsure check with the dealer.
The first time set up screens takes you through the following:
• Language selection
• Vessel type selection
If a pilot controller already exists on your system then this
procedure may be skipped and the p70 / p70r will adopt the
same settings as the already installed pilot controller.
Note: If calibration has not been undertaken then the display
will alarm 'Calibration required' and then show 'Starting' on
the display
Commissioning
Before using your autopilot system for the first time you must
ensure that the system has been correctly commissioned
in accordance with the supplied installation instruction.
Commissioning procedures which must be carried out are:
• Dockside calibration (Dealer settings on SeaTalk)
• Seatrial calibration
Planning the installation
21