33
Display power
This sequence enables you to see the power levels of the ACU,
Antenna and IRDs that are installed on your system.
Note: The ACU automatically scrolls between steps 4, 5 and 6
of this sequence.
Setting antenna go position
1. Press YES to enter set up
mode.
2. Press NEXT six times to
show View Power menu.
3. Press YES to enter View
Power menu.
4. ACU voltage is shown.
Press center soft key to view
Press EXIT to return to main
set up menu.
SET UP MODE ?
YES NO
D7973_2
SET SAT PAIR ?
PREV YES NEXT
D7974_2
VIEW POWER ?
PREV YES NEXT
D****_1
ACU POWER : 27.1V
EXIT
D10590_1
5. Antenna voltage is shown.
Press center soft key to view
IRD voltage.
Press EXIT to return to main
set up menu.
6. IRD voltage and frequency
are shown.
Press EXIT to return to main
set up menu.
1. Press YES to enter set up
mode.
2. Press NEXT eight times to
show Ant Go Position menu.
ANT POWER : 25.9V
EXIT
D10591_1
IRD: 18 V + ###KHZ
EXIT
D10592_1
SET UP MODE ?
YES NO
D7973_2
SET SAT PAIR ?
PREV YES NEXT
D7974_2
81304_2.book Page 33 Thursday, March 26, 2009 3:59 PM
