31
Note: Raymarine does not recommend changing the LNB type
unless instructed to do so.
Setting the DiSEqC method
1. DiSEqC method
DO NOT USE DISEQC - DiSEqC is not used.
USE TO CHANGE BAND - DiSEqC is used to change high
and low bands (Europe).
USE TO CHANGE SAT - DiSEqC is used to change satellite
being tracked (US- DirecTV).
Display version
This sequence enables you to see what version of antenna and
ACU software versions are installed on your system.
5. Press YES to accept the
data.
Press NO to cancel and
return to main menu.
1. Press YES to enter set up
mode.
2. Press NEXT four times to go
to Use DiSEqC menu.
3. Press YES to enter DiSEqC
menu.
D7977_2
SAVE ?
YES NO
SET UP MODE ?
YES NO
D7973_2
SET SAT PAIR ?
PREV YES NEXT
D7974_2
USE DISEQC ?
PREV YES NEXT
D8000_2
4. Select the DiSEqC method
(1)
.
PREV - shows last method.
SELECT - sets the displayed
method.
NEXT - shows next DiSEqC
method.
5. Press YES to accept the
selection.
Press NO to cancel and
return to main set up menu.
DO NOT USE DISEQC
PREV SELECT NEXT
D8001_2
D7977_2
SAVE ?
YES NO
81304_2.book Page 31 Thursday, March 26, 2009 3:59 PM
