Raymar Alliance V.32, Инструкция по эксплуатации

Страница: 91 / 201

0049-2702-XXX Alliance Series Modems – USER MANUAL 08/05/2010
Rev. A Page 87 of 197
APP without Callback
•
Enter the same password in the front panel password screen (on the LCD) of the
originating modem and answer modem.
APP with Callback
•
Enter a password in the front panel password screen of the originating modem (the user
password).
•
A password must be entered in the front panel password screen of the answer ALX ( the
master password ). Any password will do (even a single character), except that it should
not be the same as the user password, and it should not be the same as any other
password stored in the answer modem’s memory (for APP or MPP).
APP with callback
will not function if the master password is removed.
•
Use the Hayes AT &Z command to store the user password and callback phone number
in the answer modem’s memory.
Password Screens
For either type of APP, a password must be preprogrammed through the PASSWORD screen of
both the answer and originating modems, as explained below. (The PASSWORD screen is
displayed only on the ALX V.32M, V.32/14.4M, V.32/19.2M and V.34M.)
For APP without callback, use the same password on both modems. For APP with callback, do
not use the same password – see the preceding section.
Establishing or Changing the Automatic Password
The automatic password can be changed (or initially established) using the front panel password
screens shown below. These screens are accessed via the PASSWORD screen.