Raymar Alliance V.32, Инструкция по эксплуатации

Страница: 98 / 201

0049-2702-XXX Alliance Series Modems – USER MANUAL 08/05/2010
Rev. A Page 94 of 197
Upon receipt of the correct password, CANARY, the local ALX will call back the remote user at
555-1212. Once this connection is established, data may pass freely.
Note: MPP passwords and callback numbers may only be stored in phone cells 2 through 49.
To Program a Response to a Correct Password:
Enter
AT &Z0=/UMESSAGE
But replace MESSAGE with the message of your choice.
The DTE will respond with the specified message when the modem receives a correct password.
Note: The /U command and message can only be stored in phone cell 0.
To Suppress the PASSWORD? Query Message:
For an added measure of security, the PASSWORD? query message may be disabled. With the
query message suppressed, unauthorized users will not be informed that a password is required;
however, a password will nonetheless be required if an MPP password has been implemented.
The only difference will be the absence of the PASSWORD? query message.
To suppress the PASSWORD? message, refer to Appendix C and the V.42 ERROR
CORRECTION OPTIONS diagram. Change the PASSWORD? query message setting shown in
the diagram, from 1 (the factory setting) to 0.
Disabling Security Operation
To clear the modem security configuration, and thereby deactivate security operation (APP or
MPP), initiate a factory reset as follows: Push and hold in the right arrow pushbutton on the front
panel as you power up the modem until the words “FACTORY DEFAULT” appear on the LCD.
This will reconfigure the modem to the state it was in when shipped from the factory.
Security operation will be permanently disabled – unless the modem is later reconfigured
for security operation. Note that a factory reset will delete any phone numbers stored in
the modem’s memory.