Raven MPV-7100, Руководство по обслуживанию

Страница: 10 / 50

Blade Motor Controller (BMC) Install
Installation Instructions
Tools:
•
10 mm Driver
•
Philips screw
driver
•
5mm Allen Driver
Instruction Text
1. Attach BMC by re installing the 5mm button
head screws and the 10mm nut.(Fig A)
2. Attach the three wires on the junction box. Blue
Green and Yellow. The wires should color
match order doesn’t matter as long as routing
doesn’t resurrect covers. (Fig B)
3. The power wire from the controller should be
placed under the controller wire as shown.
(Fig C)
4. Be sure the covers are tight and for the side
with optocoupler use Loctite 242 and longer
screw.(Fig D)
5. Connect the sensor wire from the blade motor
to the connector from the BMC. (Fig E)
6. Connect 12V signal connector. The male
connector is from the optocoupler. (Fig F)
7. The wires should be zip tied and correct neat
fitment to not pinch wires when covers are
installed.(Fig G)
8. Attach covers with Phillips screwdriver. (Fig H)
A
B
C D
E
F
G
H
Denver Global Products 1000 East Powell Dr. | Lincolnton, NC 28092 U.S.A
© 2014 Denver Global Products | RATO All rights reserved.