INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 51 of 64
Move the selection line under the option to be changed
by means of the “F2 key”
, and set the lower
limit by means of the “centr key”
.
After terminating the operation, press the “F1 key”
to exit.
IN THE PLANT, BOTH THE RESO-
LUTION AND THE LOWER LIMIT
FOR THE DYNAMIC WHEEL BAL-
ANCING MODE ARE SET TO 5 G.
THE LOWER LIMIT FOR ALL THE
OTHER MODES IS SET TO 7 G.
20.5 Setting adhesive weight dimensions
and static threshold percentage
To ensure the balancing machine precisely calculates
the dimensions and total adhesive weights, set the
thickness and length of the adhesive weights at dis-
posal.
It is also necessary to set the static threshold percent-
age used in the ECO-WEIGHT procedure
To set the above values, from the opening presentation
page (see
Fig. 33
), press the “F1 key”
; the
program will display the page in
Fig. 96
.
Press the “F2 key”
. Enter password
F1-F2-
CENTR-F3
to access the “customer configuration”
screen page (see
Fig. 98
).
From the "client configuration" page, press
6 succes-
sive times
the "F4 key"
, the program will
show the following screen page:
Fig. 104
5
KEY
1 – Setting the adhesive weight thickness (4mm)
2 – Setting the adhesive weight length (14 mm)
3 – Static threshold percentage used in the ECO-
WEIGHT procedure. Can be set between 0 and
200%
4 – Selection line
5 – Return to
Fig. 96
screen page (RED) (F1)
6 – Move the selection line under adhesive weights
setting or under the static threshold percentage
(YELLOW) (F2)
7 – Change the selected values with the selection
line (CENTRAL)
8 – Return to
Fig. 98
customer configuration
screen page (GREEN) (F4)
7
8
3
6
2
4
1
1297-M010-0_R
G2.124R - GP2.124R
RAVAGLIOLI S.p.A.
