INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 27 of 64
To confirm all the entered measurements, press “CEN-
TR key” again
. The program will show the
screen page in
Fig. 46
.
Fig. 45
Fig. 46
Dimensions entered
and confirmed
15.1.2 Manual setting of wheel dimensions
In case the operator wants to edit and/or manually
enter the wheel dimensions, proceed as follows:
- from the screen page of the dimensions automatically
detected (for instance
Fig. 38
and
Fig. 40
) press
“centr key”
to select the value to be modi-
fied or to be set;
- the display will show the selected value on a black
background and, on the right, the same value in large
types (
Fig. 47
and
Fig. 48
);
- enter the dimension by pressing “LESS”
or “MORE”
key until the desired value is
reached.
Press “centr key”
to confirm and to move
to the next value.
Example of DYNAMIC mode:
Fig. 47
1
2
3
4
5
6
KEY
1 – Selection mode
2 – Rim width (selected dimension)
3 – Selected dimension displayed in large types
4 – N° of current user
5 – Rim distance value
6 – Rim diameter
1297-M010-0_R
G2.124R - GP2.124R
RAVAGLIOLI S.p.A.
