Rauch AXIS ISOBUS, Инструкция по эксплуатации, Страница: 48 / 110

Operation AXIS ISOBUS 4
42
Operating mode selection
1.
Switch on the AXIS ISOBUS machine control unit.
2. Open the Machine settings > AUTO/MAN mode menu.
3. Select the desired menu item from the list.
4. Press OK .
5. Follow the instructions on the screen.

Important information on the use of operating modes for the spreading oper-
ation is provided in chapter
5: Spreading operation with the machine control
unit AXIS ISOBUS, page 73 .
Automatic mode with automatic weighing (AUTO km/h + AUTO kg)
1. Select operating mode AUTO km/h + AUTO kg
2. Press OK .
 The Weigh quantity window is displayed.
3. Case a: Refill
 The flow factor setting is retained.
 The left fertiliser quantity is increased by the refill quantity.
Case b: New fertiliser
 The flow factor is reset to 1. If necessary, the required flow factor value
can be entered subsequently. Refer to chapter
4.4.3: Flow factor,
page 28 .
4. Select the desired type of filling.
 The machine control unit switches to the operating screen.
NOTICE
We recommend displaying the flow factor in the operating screen. This way, the
mass flow control can be monitored during spreading. Refer to
chapter
2.2.2: Display fields, page 7 and chapter 4.5.1: AUTO/MAN mode,
page 41 .
n
CAUTION
Cancelling the weighing function may lead to incorrect meter-
ing
The ESC button must not be pressed. This may lead to serious
errors in application rate/metering.

To confirm the weighing function, always select the type of
filling.