Rauch AXIS ISOBUS, Инструкция по эксплуатации, Страница: 39 / 110

Operation AXIS ISOBUS
33
4
4.4.6 TELIMAT rate
In this menu, the TELIMAT quantity reduction can be set (in percent). This setting
is used if the boundary spreading function is activated via the TELIMAT sensor
or the
TELIMAT function key is pressed.
Entering the TELIMAT quantity:
1.
Open the Fertiliser settings > TELIMAT rate menu.
2. Enter the value in the input field and confirm.
 The fertiliser settings window with the new TELIMAT quantity is displayed.
4.4.7 Calculate OptiPoint
In the Calculate OptiPoint menu, you can enter the parameters to calculate the
optimum turn-on and turn-off distances in the headlands .
It is very important to enter the distance factor of the fertiliser used to obtain an
exact calculation.
1. Enter the prescribed value in the Fertiliser settings > Distance factor menu.
2. Open the Fertiliser settings > Calculate OptiPoint menu.
 The first page of the Calculate OptiPoint menu is displayed.
3. Enter the average forward speed in the switching positions area.

The second page of the menu is displayed.
NOTICE
It is recommended to reduce the application rate at the boundary spreading side
by 20 %.
NOTICE
For the distance factor of the fertiliser used please refer to the fertiliser chart of
the machine.
NOTICE
The indicated forward speed refers to the forward speed in the area of the
switching positions! See chapter
5.9: GPS Control, page 88 .