Rauch AXEO 2.1, Инструкция по эксплуатации

Страница: 97 / 136

Spreading work
89
8
8.3 Instructions regarding the spreading operation
The intended use of the machine includes compliance with the operating, mainte-
nance, and service conditions in accordance with the manufacturer specifications.
Spreading therefore always includes preparation and cleaning/maintenance .

Carry out spreading operations as described below.
n
DANGER
Danger of injury when spreading
Contact with rotating machine components (universal drive shaft,
spreading disc, agitator) may cause injury. Body parts or objects
may be caught and pulled in.
 Only spread with the protective grid being mounted.
n
CAUTION
Risk of injury due to ejected spreading material
Only for machines with electronic control unit
In the event of faults, the metering slide could open unexpectedly
on the way to the spreading location. There is a danger of slipping
and injury due to leaking spreading material.
 Before leaving for the place of spreading, the electronic
QUANTRON-K2 or E-CLICK control unit must always be
switched off .
Preparation Page

Installing the spreader at the tractor Page 39

Close metering slide

Presetting the mounting height Page 41

Fill in the spreading material Page 46

Adjusting the drop point Page 55

Carry out the calibration test Page 85

Adjust the spreading width limiter Page 53
Spreading

Travel to the spreading location

Engage the drive

Open the slide and start spreading

Finish spreading operations and close the slide

Disengage the drive

Discharging residual material Page 95