Rauch AXEO 2.1, Инструкция по эксплуатации

Страница: 68 / 136

Machine settings 7
60
1. Untighten the setscrew [2] at the half-side slide.
2. Slide the adjustment lever [3] to the desired position.

Adjustment lever towards higher numeric values: Slide is closed .

Adjustment lever towards lower numeric values: Slide is opened .
3. Tighten the setscrew [2].
4. Check the spreading pattern (visual inspection or measurement) and correct
the settings as necessary.
Information on adjustment
For sharp-edged limitation of the spreading pattern at the right edge of the path
with application rate balancing and even spreading material distribution:

Determine the adjustment values for the spreading material (fertiliser chart).

Lower the right spreading width limiter and close the half-side slide (refer to
figure 7.9 ).