Rauch AXEO 2.1, Инструкция по эксплуатации

Страница: 48 / 136

Commissioning 6
40
The machine is installed at the three-point linkage (rear power lift) of the tractor.
Installation instructions:

The AXEO 2.1/6.1 is only to be connected to a category II tractor with cate-
gory I clearance and using reducing sleeves.

AXEO 18.1 is only to be connected to a category III tractor with category II
clearance and using reducing sleeves.

AXEO 2.1 is only to be connected to a category 1N tractor using an adapter.
-
The maximum payload is reduced to 300 kg.

The lower and upper link pins must be secured with lynch pins or spring clips.

Always install the machine horizontally.

To ensure correct cross-distribution of the spreading material, the machine
must be mounted as specified in the fertiliser chart.

In order to avoid sideways movements during spreading, make sure that the
machine does not have too much sideways play.
-
The lower link arms of the tractor are to be braced by means of stabilising
struts or chains.
NOTICE
We recommend using lower link hooks with a hydraulic upper link for safety and
comfort.