Rauch 2.1, Руководство оператора

Страница: 61 / 121

Machine adjustments
55
7
7.7 Using the fertiliser chart
7.7.1 Information on the fertiliser charts
The values in the fertiliser charts have been determined on the spreading mate-
rial test system.
The spreading materials specified have been purchased from the manufacturers
or from dealers. Experience shows that due to storage, transport and other rea-
sons, your spreading material – even with identical specifications – might exhibit
a different spreading behaviour.
This means that the spreading material settings specified in the fertiliser charts
may result in a different spreading amount and a poorer material distribution.

Always check the actual spreading amount with a calibration test (see
7.8: Calibration test, page 78 ).

Observe the setting values exactly. Even a slightly incorrect setting may ad-
versely affect the spreading pattern.

Adjustments for spreading materials not listed in the fertiliser chart can be de-
termined by a calibration test.
NOTICE
With narrower working widths you can reduce the speed of the spreading disc.
Carry out a calibration test at the new speed.
NOTICE
The operator is responsible for making the correct adjustments according to the
spreading material used.
We point out specifically that we do not accept any liability for damage resulting
from incorrect spreader adjustments.