Commissioning
6
32
6.4.2
Fitting and removing the PTO shaft
Fitting:
1.
Checking the installed position.
The end of the shaft with the tractor symbol must face the tractor's PTO.
The locking screw of the drive shaft guard is released. The drive shaft
guard is in the removal position.
n
DANGER
Danger of catching in the rotating drive shaft.
Attaching and removing the universal drive shaft with the engine
running may cause severe injuries (crushing, catching in the rotat-
ing shaft).
Switch off the tractor's engine and remove the ignition key.
2.
Grease the PTO stub. Push
the drive shaft onto the PTO
stub.
Figure 6.2:
Grease the PTO stub.
3.
Tighten hexagonal screw
and nut with 17 mm wrench
(max. 35 Nm).
Figure 6.3:
Connect the universal drive
shaft.
Содержание 2.1
Страница 30: ...Machine data 4 24...
Страница 32: ...Transport without tractor 5 26...
Страница 108: ...Service and maintenance 9 102...