Raritan CC-SG, Руководство пользователя

Страница: 46 / 58

C
HAPTER
3: C
ONNECTING
T
O AND
U
SING
N
ODES
V
IA THE
CC-SG A
CCESS
C
LIENT
39
5. Click the Operation drop-down arrow, and select Power On , Power Off , Power Cycle , or
Graceful Shutdown from the list.
6. If you selected multiple interfaces, type the number of seconds that should elapse between
interfaces in the
Sequence Interval (seconds) field.
7. Click OK to begin the power control operation. Click OK in the confirmation message that
appears to start the operation. Another message will appear when the operation completes, to
give you the status of the operation.
Node Group Power Control
Node Group Power Control allows you to control power for all or selected interfaces in a node
group. For power on and power off operations, you can select the order in which interfaces are
powered on and off.
Control power for all or selected interfaces in a node group
1. Click the Power Control tab at the top of the screen, and then click Node Group Power
Control to open the Node Group Power Control screen.
2. Click the Node Group drop-down arrow and select the node group that you want to control
power for from the list. The Available list displays all interfaces in the selected node group.
3. In the Available list, select the specific interface that you want to perform power control on,
and then click Add to move the interface to the Selected list. Repeat this step until you have
added all necessary interfaces to the Selected list.
4. You must put the interfaces in the Selected list into the order in which you would like CC-SG
to perform the power operation. Select an interface in the Selected list, and then click the up
and down arrows to move the interfaces into the desired sequence.
5. Click the Operation drop-down arrow, and select Power On , Power Off , Power Cycle , or
Graceful Shutdown from the list.
6. If you selected multiple interfaces, type the number of seconds that should elapse between
interfaces in the
Sequence Interval (seconds) field.
7. Click OK to begin the power control operation. Click OK in the confirmation message that
appears to start the operation. Another message will appear when the operation completes, to
give you the status of the operation.