Ransomes FAIRWAY 250, Инструкция для оператора

Страница: 54 / 80

52
Fig.34
Fig.36
Fig.37
GB GB
GB GB
GB
ADJUSTMENTS ADJUSTMENTS
ADJUSTMENTS ADJUSTMENTS ADJUSTMENTS
Read the safety instructions
FWD/REV FOOT PEDAL (Fig.34)
With drive wheels off the ground and no pressure
on the FWD/REV foot pedal, start the engine and
check to see if the wheels turn. If they do, proceed
to adjust. If not, skip this adjustment.
WARNING
Properly support raised machinery with jack stands.
1. Stop the engine.
2. Loosen nut X at hydrostat.
3. Adjust outer cable as required.
4. Tighten nut X.
STANDARD FOOT BRAKE & BRAKE BANDS
(Fig.36, 37)
Adjust so that both brakes lock evenly when the
parking brake foot pedal is depressed. Loosen nuts
T and turn nuts G on the two cables. Also, adjust
nuts H for each wheel so that neither brake band
drags when the parking brake is disengaged.