Ransomes FAIRWAY 250, Инструкция для оператора

Страница: 30 / 80

28
GB GB
GB GB GB
DRIVING
l
Release brake - Make sure the parking brake is
released before attempting to go forward or
reverse.
l
Neutral Latch - For either forward or reverse
motion, the neutral latch located in the top plate
of the FWD/RVS foot pedal must
simultaneously be depressed.
l
Forward - Gently depress the top plate of the
FWD/RVS foot pedal to reach desired ground
speed.
l
Reverse - Gently depress the bottom plate of
the FWD/RVS foot pedal to reach desired
ground speed.
l
To stop - Gently return the FWD/RVS foot
pedal to the neutral position.
NOTES:
l
Use complete foot to operate both forward and
reverse.
l
Make sure Neutral Latch remains pushed in.
l
Do not move pedal suddenly–always operate
slowly and smoothly. Never move pedal
violently from forward to reverse or vice versa.
l
Always keep foot firmly on the foot pedal–a too
relaxed foot control may result in a jerky motion.
MOWING
1. Lower the reels with the cutting unit lift control.
2. Engage the cutting mechanism by pushing on
the lower half of cutting unit switch and
operating the floor mounted switch.
3. Release the parking brake and begin driving
forward.
NOTE: Always set the throttle on full for
mowing, even when the grass is heavy. When
the engine is labouring, reduce forward speed
by easing up on the FWD/RVS foot pedal.
TO STOP THE ENGINE
1. Disengage power to the cutting units with the
cutting unit switch.
2. Remove foot from the FWD/REV pedal.
3. Set the parking brake.
4. Move the throttle control lever to the SLOW
position.
5. Turn the ignition key to OFF.
IMPORTANT: The Fairway 405 turbocharged
engine should be allowed to idle for five minutes
before switching off.