Ransomes FAIRWAY 250, Инструкция для оператора

Страница: 20 / 80

18
Fig.2
Fig.3
Fig.4
CONTROLS CONTROLS
CONTROLS CONTROLS CONTROLS
A - FUEL GAUGE
Displays indication of amount of fuel in the tank.
B - TEMPERATURE GAUGE
Displays indication of the temperature of the engine
coolant.
C - ENGINE OIL LIGHT
Light comes on if engine oil pressure drops too low.
D - HYDRAULIC OIL LIGHT
Light comes on if hydraulic oil temperature is too
high.
E - THROTTLE
Forward for higher engine speeds. Back for slower.
F - ALTERNATOR LIGHT
Light comes on if the battery is not being charged.
G - GLOW PLUG LIGHT
Light comes on when ignition switch is turned left to
the glow plug preheat position. Light turns off
automatically when glow plugs are preheated (5-10
sec.)
H - IGNITION SWITCH
The ignition switch has four positions. Center is
OFF. All the way clockwise is START. Part way to
the detent clockwise is ON without start. Counter-
clockwise operates the glow plug heater.
I - MOW/TRANSPORT SWITCH
Push bottom of rocker switch to put mower in 2-
wheel drive (for transport). Push top for 4-wheel
drive (for mowing). Cutting units will not come on in
2-wheel drive.
J - CUTTING UNIT SWITCHES
Push bottom of rocker switch and operate foot
switch to start cutting units rotating. Push top of
rocker switch to stop cutter unit rotation. (Cutting
units stop rotating automatically when raised.)
K - FUSES
Blade-type fuses are used to protect electrical
circuit.
L - STEERING WHEEL LOCK
Allows adjustment of the steering wheel.
M - HOURMETER
Records engine running hours.
GB GB
GB GB GB
Fig.4A