9040 Low Voltage Control Unit Kit- Safety
AREA
HAZARD
SAFEGUARDS
Tells where hazards
Tells what the hazard is.
Tells how to avoid the hazard.
may occur.
General Use and
Improper operation or maintenance Personnel must be given training in accordance with
Maintenance
may create a hazard.
the requirements of NFPA-33 or European norms.
Personnel must be properly trained Instructions and safety precautions must be read and
in the use of this equipment.
understood prior to using this equipment.
Comply with appropriate local, state, and national
codes governing ventilation, fire protection, operation
maintenance, and housekeeping. Reference OSHA,
NFPA-33, European Norms, and your insurance
company requirements.
Electrical
High voltage equipment is uti-
The power supply, optional remote control cabinet,
Equipment
lized. Arcing
in areas of
and all other electrical equipment must be located
flammable or
combustible
outside Class I or II, Division 1 and 2 or Zone 1
hazardous areas. Refer to proper European Norm
or NFPA 33.
materials may occur. Personnel
are ex-posed to high voltage during
operation and maintenance.
Turn the power supply OFF before working on the
equipment.
Protection against inadvertent
arcing that may cause a fire or
Test only in areas free of flammable or combustible
explosion is lost if safety circuits material.
are disabled during operation.
Testing may require high voltage to be on, but only
Frequent power supply shutdown as instructed.
indicates a problem in the sys-tem
which requires correction.
Production should never be done with the safety
circuits disabled.
An electrical arc can ignite coat-
ing materials and cause a fire or Before turning the high voltage on, make sure no
explosion.
objects are within the sparking distance.
3
CP-11-01
Содержание 9040
