9040 Low Voltage Control Unit Kit- Introduction
The 9040 Cascade control unit has also been
modularly designed so that two half rack 9040
chassis will fit into one full rack enclosure, in
multiple applicator installations. The full rack
enclosure has been designed for mounting in
standard 19-inch rack mount cabinets.
The 9040 Control Unit Kit for automatic
applications includes an additional normally open
pressure switch (3PS) connected between fuse
1FU and ON/OFF switch 1SW. The air input to
this pressure switch is located at the rear of the
control unit and is labeled 3PS. When the air
signal is removed from this input, the contacts of
the pressure switch are open and AC power to the
control unit is disconnected.
The 9040 Cascade Control Unit is available for
automatic applicators as follows:
9040
Kit #
Used with Applicator Type
Applicator #
80072-1XX**
Esta-Quick (110/120 V inputs)
AEMD-500
80072-2XX**
Esta-Quick (220/240V inputs)
AEMD-500
80078-1XX
Evolver SE (110/120 V inputs)
A12455
80078-2XX
Evolver SE (220/240 V inputs)
A12455
**Note:CE/Atex approval with this power source is only for the AEMD-500
9040 Low Voltage Control Unit Kit Part Structure
80072-ABC (Atex approved when used with AEMD500)
A-Unit Power Type
-1 For 110/120 V Input Power (USA)
-2 For 220/240 V Input Power
B- High Voltage Cable Length
-1 For 4.5 m (15 ft.)
-2 For 7.5 m (25 ft.)
-3 For 15 m (50 ft.)
-4
For
22.5m
(75
ft.)
C-Low
Voltage
Cable
Length
-1 For 3 m (10 ft.)
-2 For 7.5 m (25 ft.)
-3 For 11 m (36 ft.)
80078-ABC (Not Approved)
A-Unit Power Type
-1 For 110/120 V Input Power (USA)
-2 For 220/240 V Input Power
B- High Voltage Cable Length
-1 For 4.5 m (15 ft.)
-2 For 7.5 m (25 ft.)
-3 For 15 m (50 ft.)
-4
For
22.5m
(75
ft.)
C-Low
Voltage
Cable
Length
-1 For 3 m (10 ft.)
-2 For 7.5 m (25 ft.)
-3 For 11 m (36 ft.)
CP-11-01
8
Содержание 9040
