Names of Parts
1. Charging Dock station
Power switch
IR sending window
Power adapter socket
Charging terminals
Floor skidproof pads
Full go
Clock
Adjuster
Timing
2. Remote Controller
3. LED Display
Indicator
Speed Adjuster
Auto
Dirt indicator
Digital display
Time
UV
Error indicator
Battery Power
Spot
Pause
Leftward
Wall-following
Auto
Power
Docking
Spot
Forward
Rightward
Backward
UV button
Cleaning Preparations
Installation of the Charging Dock station
01. Place the charging dock station on level ground with the back against the wall.
02. Make sure that no obstacle and uneven ground in the area within 3 meters in front of the base and
0.5m respectively on the left and right of it. (See figure 1)
03. Ensure that IR sending window on the base is clean without dust or something else covered,
otherwise, the function of self-charging will be influenced
04. Connect the output plug of the adapter to the Power socket of the Dock Station. (See figure 2)
05. Tidy up the electric wire along the wall to avoid obstructing the operation of the Robot.
High tension! Avoid electric shock.
Please operate with a dry hand!
Figure 1
Figure 2
