01. In the standby status, press the mode button “ ” to choose AUTO, SPOT, DOCKING in turn,
and corresponding indicator will be on accordingly .
02. AUTO: Auto cleaning status, in this status, press the select button “ ” to switch between 1,
2 and 3 secondary modes, the display will show corresponding digit.
The cleaner can find the charg-
ing dock station when it reaches
the area about 3 meters in front
of the base within the 90° fan-
shaped region .
How to use the function of the button on the cover :
Modes:
1
– The cleaner will work until the battery is used out and then search the
charging dock station automatically for recharge.
2
– The cleaning work will last for 30 minutes.
3
– The cleaning work will last for 15 minutes.
Modes:
03. SPOT: Spot cleaning, in this status, press the selection button “ ” to switch between 1, 2 and
3 secondary modes, the display will show corresponding digit .
1
– Cleaning along the spiral route (working for 1-4 minutes).
2
– Cleaning along the zigzag route (working for 1-4 minutes).
3
– Cleaning follow the walls (working for 10 minutes).
04. DOCKING: self-charging mode, in this mode, it can automatically search the charging dock station.
05. Select button “ ”: this enables you to select 1, 2, 3 secondary modes orderly in the primary
models of AUTO/SPOT.
06. UV button “ ”: this allows you to turn on or off the UV lamp during the cleaning process, press
once to turn on and press again to turn off. (The UV lamp is on when turn on the cleaner)
07. Run button “ ”: when the SPOT/AUTO/DOCKING mode is selected, press this button to start
the particular mode.
The UV lamp is applied for sterilization ,
please do not look straightly at it.
Dirt Detection Function
In order to achieve better effect of cleaning, this product provide the dirt detection function, during the
operation of the robot, if it reaches a place with a lot of dirt or debris, the dirt indicator on the LED Display
will turn on, and the robot will increase the cleaning intensity to such areas.
