Charging :
A. Manual Charging
01. You can directly charge the cleaner with its power adapter or with the charging dock station.
02. When charging directly via the power adaptor, please connect the output plug of the adapter with the
charging socket on the robot. (See figure 1)
03. When charging with the charging dock station, please first connect the adapter to it, and then place
the cleaner tightly against the dock station to ensure a nicer contact between the charging electrode
of the cleaner and the charging terminal on the dock station. (See figure 2)
04. During the charging process, the display will show the charging status, and the battery level bars will
turn red from the 1
st
bar to the 3
rd
bar in order repeatedly. (See figure 3)
05. Upon completion of the charging, the display will show 3 fully red bars. (See figure 4)
High tension! Avoid electric shock.
Please operate with a dry hand!
High tension! Avoid electric shock.
Please operate with a dry hand!
Figure 1
Figure 2
Figure 3
Figure 4
1. Take out the battery before disposing of the robot.
2. Always remember to cut off the power before removing
the battery.
3. Recycle or dispose of the battery properly.
4. To avoid explosion, never throw it into fire!
B. Self-Charging
01. The cleaner will automatically start to search the charging dock station for recharge when the battery
level is lower than 15% during cleaning process.
02. When press the
DOCKING
button on the cover of the robot or the remote controller, the function of
self-charging will also be enabled.
03. During the above “DOCKING” mode, press any other button on cleaner or remote controller, the
cleaner will stop searching and enter the standby status. The directional buttons on the remote
controller can also be used to support the searching function.
