Trouble shooting
Below inspections by yourself to this product before you request a repair.
A. The Robot Stops while Working
01. Check if the selected cleaning time is over.
02. Check if there’s any error information on the LED display and refer to the following
explanations to solve it.
B. The Cleaner Fail to Work or the Cleaning Ability is Weakened
01. Check the battery status.
02. Check whether the dustbin, the filter and the inlet of suction are cleaned; whether the side
brush is working.
03. Check whether the cleaner is turned on.
C. The Remote Controller Can not Work
01. Check the battery status of the controller.
02. Check the battery status of the cleaner.
03. Wipe the IR sensor or the beam sensor of the controller by clean and dry cloth.
04. Keep proper distance between the cleaner and the controller, and then operate the controller
directlyfacing the IR receiver on the cover of robot
To ensure a more effective cleaning of this robot, please
clean the sensors regularly.
D. The Robot Fails to fulfill self-Charging
01. Check whether the power supply is normally connected with the adapter and charging dock
station.
02. Check the battery power, if it’s too low, please manually charge it with the adapter.
E. Increased Noise when Cleaning
01. Clean the dust box and the filter.
02. Check whether the brushes are too dirty.
Storing the Robot
The robot should be stored in ventilated and dry places.
