Control with the Remote Controller :
1. The power button “ ”
When the power switch of cleaner is on, press this button can ensure the robot enter the sleep
status. which can save electricity and all indicators will be off, press this button again to enter the
standby status. When the cleaner enters the sleep status, it can not be started by pressing any
button on either the cover or the remote controller before this button is pressed again to make the
robot enter the standby status.
2. AUTO button:
Press this button, the robot will work in the auto cleaning mode till the battery is used out and then
it will automatically search the charging dock station for recharge.
SPOT button
DOCKING button
Wall-following Button “ ”
Speed Adjuster “ ”
Pause button “ ”
UV button “ ”
3. Directional buttons(Forward, Backward, Leftward, Rightward ):
Press the arrow buttons to control the robot to walk in the designated direction.
Rightward
Forward
Leftward
Backward
If more than one above buttons were pressed at the same time, the
status will be uncertain.
The effective distance of the remote controller is 5-7 meters, which
varies according to different surrounding.
Charging Status
01. When the cleaner is being charged manually, it will not work when you press any button unless
your pull out the plug of power adapter.
02. A full charging time is 6-8 hours, for the first 3 times of charging of a new cleaner, please ensure
it to be charged for more than 12 hours each time, please try to use out the battery power before
charging (ensure a 12-hour charging before you use the robot for the first time).
03. If you press the AUTO button on the remote controller while the cleaner is being charged on the
charging dock station, the robot will draw back from the dock station and turn around to walk 1m
ahead, and then it will enter the AUTO mode for working.
