background image

OWNER’S MANUAL

8

SIXTY-TWO

Analog Outputs

• 

Main Out

 is on a pair of balanced XLR jacks with pin 2 “hot” per AES standards.

• 

Booth Out

 is on a pair of balanced ¼˝ TRS (tip-ring-sleeve) jacks.

• 

Session Out

 is available on a pair of unbalanced RCA jacks.

• 

Headphones

 output mix is available on both ¼˝ and 3.5 mm jacks.

The Main, Booth and Session outputs arrive from the same “Main Mix” signal. Main, Booth and Session 
outputs each have their own 

LEVEL

 control. Because all signals are identical, you may use any of these 

outputs as the “Main” output if a different cable type is required to your speaker amplifiers.
  Rane recommends balanced wiring (3-conductor) for the strongest signal and rejection of hum and 
noise. If your cable to the destination is less than 10 feet (3 meters), you can often get away with an 
unbalanced cable. See the RaneNote “

Sound System Interconnection

” at rane.com for cable wiring 

recommendations.

Quick Start: Operation

USB Control Source

The default Inputs for decks performing Digital Vinyl Simulation (DVS) are Inputs 1 and 3, but you can 
change this. Analog Input 1 or 2 may be selected in Serato DJ software as the DVS signal for the Left 
Virtual Deck. Analog Input 3 or 4 may be selected in software as the DVS signal for the Right Virtual Deck.
  To select the control sources in Serato DJ, click the SETUP button at the top of the screen. In the Audio 
tab, verify that Control Source > PGM 1 is set to “1”. This will be your Left Virtual Deck. verify that Control 
Source > PGM 2 is set to “3”. This will be your Right Virtual Deck.
  To select the control sources in Scratch Live, click the SETUP button at the top of the Scratch Live 
screen. In the Hardware > General tab, verify that Control Source > PGM 1 is set to “1”. This will be your 
Left Virtual Deck. verify that Control Source > PGM 2 is set to “3”. This will be your Right Virtual Deck.

Calibrating Serato DJ for Control Vinyl or CD

Since Serato DJ is controlled by an analog signal, there is no guarantee of what state that signal will be in 
by the time the software gets to interpret it. Therefore, Serato DJ needs to be able to handle a wide range 
of signals, and be configurable to use them optimally. Calibrating is just configuring the software to your 
situation. Calibration is equally important for both vinyl and CD users of Serato DJ.
  There are two parts to the Serato DJ Control Vinyl: The directional tone, and the NoiseMap™. Listening 
to the control vinyl, the directional tone is the 1 kHz tone. The noise map sounds like random noise over 
the top of the tone. The directional tone provides the current speed and direction of the record, while the 
noise map tells the software precisely where on the record the needle is currently.
  The Noise Sensitivity slider lets you adjust the noise threshold. A threshold is a lower limit, below which 
a process will not occur. In the case of Serato DJ, the noise threshold is the limit below which the input 
signal will not be interpreted as control signal; in other words if it’s below the threshold, it is considered
noise and ignored.
  This setting is necessary because a stylus is very sensitive, and will inevitably pick up noise from the 
environment as well as the signal on the record, especially in the noisy environment of a live show.

Содержание SIXTY-TWO













































Отзывы: