OWNER’S MANUAL
22
SIXTY-TWO
Shift Options
Several menus are available on the mixer to set preferences. Available menus are indicated with a gray up
arrow. To select a menu, press and hold the
SHIFT
button and then press the desired menu key.
Note: the Shift button may be labeled as the Delete button on older Sixty-Two Mixers.
Ext. Insert Options Menu
This menu sets the sensitivity of the external
analog insert to +4 dBu or -10 dBV. Use the
+4 dBu setting when a device operating at
4 Vrms or more is connected to the external
FlexFX Loop. Use the -10 dBV setting when
connecting lower voltage devices with RCA
connectors. The overall loop gain remains unchanged for both settings. Push the
BEAT
joystick up/down to
select the desired setting then press the joystick in to keep the selection. Press any effect button or the
SHIFT
button to exit the menu.
Filter Effect Options Menu
The Filter menu allows choosing one of four
filter types. Move the
BEAT
joystick up/down
to select the desired filter type then press the
joystick in to keep the selection. The Low-sync
Filters sync to BPM at the low point of the
sweep, and the High-sync Filters sync to BPM
at the high point of the sweep. Press any effect button or the
SHIFT
button to exit the menu.
• Low-pass Filter Low-sync.
• Low-pass Filter High-sync.
• High-pass Filter Low-sync.
• High-pass Filter High-sync.
Flanger Effect Options Menu
The Flanger menu allows the choice of positive
or negative feedback. Move the
BEAT
joystick
up/down to highlight the desired feedback
type then press the joystick in to keep the
selection. Press any effect button or the
SHIFT
button to exit the menu.
Echo Effect Options Menu
The Echo menu allows selection of four echo
effects:
• Echo.
• Echo with high-pass filter.
• Duck Echo.
• Hold Echo with high-pass filter.
Move the
BEAT
joystick up/down to highlight the desired echo type then press the joystick in to
keep the selection. For the three high-pass Echo effects, the filter corner frequency is adjusted
by highlighting the desired effect and rotating the
TIME
encoder. Press any effect button or the
SHIFT
button to exit the menu.
EXTERNAL INSERT
… +4 dBu
-10 dBV
SHIFT
EXT. INSERT
LP FILTER LO
… LP FILTER HI
HP FILTER LO
HP FILTER LO
SHIFT
FILTER
FLANGER -Fb
… FFb
SHIFT
FLANGER
ECHO
… ECHO 81 Hz
DUCKECHO 75 Hz
HD ECHO 120 Hz
SHIFT
ECHO
