Operating the instrument
R&S
®
RTO6
63
Getting Started 1801.6670.02 ─ 03
● Double-tap a result icon, or tap the icon in a result box to open the cor-
responding dialog box.
● To open the "Vertical" dialog box of a waveform, tap the signal icon.
● Tap the "Horizontal", "Acquistion" or "Trigger" label to open the corre-
sponding dialog box.
To minimize a dialog box
If you want to change only one setting during analysis, and you need to change it
often, you can display a small box that only contains the required setting.
1. Tap the setting that you need to modify.
2. Tap the "Minimize" icon in the upper right corner of the dialog box.
The dialog box turns into a small box that contains only the setting, that was
last selected.
3. To restore the complete dialog box, tap the "Maximize" icon in the small box.
To close a dialog box
► Tap the "Close" icon in the upper right corner.
6.9
Entering data
To set parameter values and enter other data, you use the various knobs and the
on-screen keypad or keyboard.
Entering data
