Instrument tour
R&S
®
RTO6
32
Getting Started 1801.6670.02 ─ 03
[Level]
The rotary knob sets the trigger level for all trigger types. Turn clockwise to move
up the trigger level. Press the knob to set the trigger level to 50% of the signal
amplitude. If the selected trigger type requires two trigger levels - upper and lower
level - press the knob to toggle between the two levels.
[Auto Norm]
Toggles the trigger mode between "Auto" and "Normal". The current setting is
shown on the trigger label.
Auto
The instrument triggers repeatedly after a time interval if the
trigger conditions are not fulfilled.
Norm
The instrument acquires a waveform only if a trigger occurs.
[Source]
Opens a dialog box where you can select the trigger source. Press the key again
to switch the source. The key lights up in the color of the selected trigger source.
[Slope]
Toggles the trigger slope or trigger polarity, dependent on the trigger type. The
current setting is shown on the trigger label.
[Run Stop]
Starts and stops the continuous acquisition. A green light indicates a running
acquisition. A red light shows that acquisition is stopped.
[Single]
Starts a defined number of acquisitions. A green light indicates a running acquisi-
tion. A red light shows that acquisition is stopped. Press the key again to stop
running acquisitions.
Keys and controls
