R&S AREG800A, Руководство пользователя

Страница: 255 / 411

Remote control commands
R&S
®
AREG800A
255 User Manual 1179.3615.02 ─ 01
Manual operation: See "Time" on page 377
:CALibration:DATA:FACTory:DATE?
Queries the date of the last factory calibration.
Return values:
<Date> string
Example:
CAL:DATA:FACT:DATE?
// "2016-01-01"
Usage: Query only
Manual operation: See "Last Factory Calibration" on page 369
:CALibration<hw>:CONTinueonerror <State>
Continues the calibration even though an error was detected. By default adjustments
are aborted on error.
Suffix:
<hw>
.
[1]
Optional suffix
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
n.a. (factory preset: 0)
Example:
CAL:CONT ON
// Continues calibration after an error
Manual operation: See "Continue Adjustment on Error" on page 378
11.5 DIAGnostic subsystem
The
DIAGnostic
subsystem contains the commands used for instrument diagnosis
and servicing. SCPI does not define any
DIAGnostic
commands; the commands lis-
ted here are all device-specific. All
DIAGnostic
commands are query commands
which are not affected by
*RST
.
The test functions are intended for services purposes.
They are thus password-protected functions. Unlock the corresponding protection level
to access them, see
:SYSTem:PROTect<ch>[:STATe]
For more information, see R&S AREG800A Service Manual.
Common suffixes
The following common suffixes are used in remote commands:
DIAGnostic subsystem