R&S AREG800A, Руководство пользователя

Страница: 62 / 411

Configuring radar objects
R&S
®
AREG800A
62 User Manual 1179.3615.02 ─ 01
"Loop" Files are played continuously within the defined positions in the file.
Remote command:
[:SOURce<hw>]:AREGenerator:SCENario:REPLay[:MODE]
on page 320
Reset
Resets "Start/Stop/Position Player" parameters.
Remote command:
[:SOURce<hw>]:AREGenerator:SCENario:RESet
on page 320
Play
Plays the selected file.
For supported file types, see Table 5-1 .
Remote command:
[:SOURce<hw>]:AREGenerator:SCENario:STARt
on page 320
Pause
Pauses the player.
After pausing, you can resume playing the file by clicking "Play" again.
Remote command:
[:SOURce<hw>]:AREGenerator:SCENario:PAUSe
on page 319
Stop
Stops the player and returns to the start position.
Remote command:
[:SOURce<hw>]:AREGenerator:SCENario:STOP
on page 321
5.4 Logging settings
The "Logging" dialog allows you to acquire, manage and save logged data of dynamic
radar scenarios.
Access:
1. In the "Operation Setup" tile, select the following:
a) Select "Mode > Dynamic".
b) Select "Data Source > Scenario".
The scenario settings become available in the radar objects selection.
2. Select "Radar Objects > Logging".
The "Logging" dialog provides settings to acquire, manage and save logged data
for dedicated dynamic radar scenarios.
Logging settings