R&S AREG800A, Руководство пользователя

Страница: 58 / 411

Configuring radar objects
R&S
®
AREG800A
58 User Manual 1179.3615.02 ─ 01
If fully equipped, the "Objects" dialog provides up to eight tabs "Channel 1" to "Channel
8" to configure up to eight radar channels individually. Each radar channel resembles
one IF path and has a dedicated channel ID "A1" to "D2" as illustrated in the table
below.
Channel "1" "2" "3" "4" "5" "6" "7" "8"
Channel ID "A1" "A2" "B1" "B2" "C1" "C2" "D1" "D2"
The number of simulated radar channels corresponds to the number of IF paths and
depends on the installed options. See
Chapter 4, "Required options" , on page 52.
Object table
Each radar channel can simulate up to eight radar objects. Configuration is provided in
a table, where the rows constitute the individual radar object and the columns consti-
tute radar object characteristics. For each radar object, you can configure simulation
state, range, attenuation, Doppler speed, horizontal angle and radar cross section
(RCS).
For all parameters specifying the radar objects, you can change the units and change
the format for configuration of Doppler dynamics. See
Chapter 5.5, "Units settings" ,
on page 65.
Object ← Object table
Displays the number of the simulated radar object.
If fully equipped, the R&S AREG800A can simulate up to eight radar objects "1" to "8".
See Table 4-2 .
Objects settings