R&S AREG800A, Руководство пользователя, Страница: 52 / 411

Required options
R&S
®
AREG800A
52 User Manual 1179.3615.02 ─ 01
4 Required options
The basic equipment layout for generating radar signals includes R&S AREG800A
base unit (R&S AREG8-B9) including one IF path.
Extensions to the base unit require installation of further options. Extend the
R&S
AREG800A as follows:
●
Increase the number of IF paths and IF bandwidth, see Table 4-1 .
●
Extend simulation capabilities of simulated radar objects, see Table 4-2
●
Install additional interfaces at the R&S AREG800A for the following tasks:
– Real-time radar object simulation
– Synchronization of multiple R&S AREG800A instruments
– Output of analog IF signals
– Input of analog IF signals
– Remote control of the R&S AREG800A via the GPIB interface
See Table 4-3 .
Table 4-1: R&S AREG800A base unit configuration
Option Designation Remark
R&S AREG8-B9 Digital baseband board IF bandwidth of 1 GHz, one IF path, one radar object
Installable up to four times.
R&S AREG8-K570 Digital baseband, sec-
ond IF path for option
B9 Requires R&S AREG8-B9.
Installable up to four times, one per R&S AREG8-B9.
R&S AREG8-K527 Digital baseband,
extension to 2 GHz Requires R&S AREG8-B9 and R&S AREG8-K570,
depending on required IF paths.
Installable up to eight times, one per IF path.
Table 4-2: R&S AREG800A artificial objects configuration
Option Designation Remark
R&S AREG8-K812 One additional object
for installed paths Requires R&S AREG8-B9 and R&S AREG8-K570.
Installable up to eight times, one per IF path.
Table 4-3: R&S AREG800A interfaces configuration
Option Designation Remark
R&S AREG8-K109 Real-time interface Simulates radar objects in real time.
R&S AREG8-K740 Analog IF output inter-
face Required for output of an analog IF signal.
R&S AREG8-K741 Analog IF input inter-
face Required for input of an analog IF signal.
R&S AREG8-K986 Remote control GPIB Required for remote control of the R&S AREG800A via
the GPIB interface.